
More happens at the dining table than eating. Homework is done there, post is opened, quarrels are settled and people talk on until late. Yet a table is often chosen by eye. That is a pity, because this is where measurements matter most: a few centimetres decide whether you stay seated or get up as soon as the plate is empty.
Count per person
Each diner needs 60 cm of table edge and a strip about 40 cm deep for plate, glass and cutlery. Two people facing each other therefore need 80 cm, and with dishes in the middle you arrive at a table width of 90 to 100 cm. Wider than 110 cm makes talking hard and you can no longer reach the middle.
The length you work out. With diners along the long sides, 120 cm is enough for four people, 180 cm for six and 240 cm for eight. If you also seat someone at each end, six people fit at 160 cm and eight at 220 cm. Mind the legs. If they stand at the corners, measure the space between them and not the top: that is where the chairs have to fit.
Round or rectangular
At a round table nobody sits at the head and everyone faces everyone else. Work out the circumference, the diameter times 3.14, and divide by 60. A table 100 cm across is generous for four people, 120 cm suits six, 150 cm eight. A round table on a single central pedestal is the kindest there is, because nobody sits with a leg between their knees.
Follow the shape of the room: a round table in a square room, a long one in a long room.
Space all round
A table is as large as the space around it allows. Between the table edge and the wall or the cabinet you need at least 90 cm to push your chair back and stand up. If someone has to walk past behind the chairs, allow 110 cm.
A chair to sit in for a long time: the lesson of Hans Wegner
The Dane Hans Wegner (1914–2007) was apprenticed to a cabinetmaker at fourteen and designed more than five hundred chairs in his lifetime. In 1949 he drew the Wishbone Chair, the Y Chair, which has been made since 1950. A split back splat in the shape of a Y carries the bent top rail, and the seat is woven by hand from paper cord.
The lesson: choose a dining chair with your body, not your eyes. Sit in it for a quarter of an hour. Does the back support you, is there somewhere for your arms, can you shift your weight? And anyone who draws five hundred chairs knows that no single perfect one exists. So more than one kind may happily stand at your table.
Nothing too much: the lesson of the Shakers
The Shakers were a religious community that left England for America in 1774 and lived together there in villages of their own, with shared property. Simplicity, utility and honesty were their guiding principles, in their furniture too. They rejected inlay, carving and veneer as prideful or deceitful. Their best-known piece is the ladder-back chair with a woven seat, which the New Lebanon community made as a trade around 1860 and which later influenced the Danish designers.
Along the walls of their rooms ran a wooden rail with pegs. On it hung clothes, hats and light furniture, chairs included. That kept the floor clear.
The lesson: a dining chair should be light. You lift it with one hand, you draw it up without noise and you add two more just like that. And what is not needed at the table does not belong in the dining area.
Three hundred chairs for one canteen: the lesson of Arne Jacobsen
In 1952 the Dane Arne Jacobsen designed a chair for the canteen of a Danish pharmaceutical firm: the Ant. Seat and back are a single shell of moulded, laminated veneer. The chair had to be light, stand firm and stack easily. The firm ordered three hundred, and that persuaded the furniture maker to put the chair into production.
The lesson lies in that canteen. Where many people eat at one table, you need chairs that take up little room: slender, without arms and with thin legs. Put such chairs along the long sides and keep the armchairs for the ends.
Choosing and mixing chairs
The measurements are fixed. A dining chair has a seat height of 45 to 47 cm; a dining table is 74 to 76 cm high. So there is about 30 cm between seat and tabletop. Measure the clear height under the edge of the top as well, and the height of the armrests. The armrest must fit a few centimetres beneath it, or the chair will not slide in.
Mixing chairs is fine, and with old chairs it is often the only way to arrive at six or eight. Then keep something the same: the seat height in any case, and besides that the wood, the colour or the shape of the back.
A bench along one long side makes the table friendly and saves space, because it can stand against the wall. Take a bench with the same seat height as the chairs, 35 to 40 cm deep and shorter than the space between the table legs.
The lamp and the rug
The lamp turns the table into a place. Hang it over the middle of the top, with the underside 70 to 80 cm above the table: low enough for a circle of light, high enough to look at each other beneath it. Over a table longer than 200 cm, hang two, or one elongated lamp.
A rug under the table makes the dining area a room of its own and softens the scraping of chairs. It only works if it is large enough: 60 to 70 cm all round the top, so that the chairs stay on it when you stand up. Under a table of 180 by 90 cm that means a rug of at least 300 by 210 cm. If the room is small or the floor is beautiful, leave the rug out.
Step by step
First count how many people sit at the table on an ordinary day and how many on a special occasion. Choose the table for the ordinary day and find a solution for the occasion: an extension leaf, or a second small table you push up to it.
Measure the room and subtract twice 90 cm from the length and the width, or 110 cm on the side where people walk. What remains is your largest table. Mark that size on the floor with masking tape, put the chairs you have around it and walk around the outline for a day. Then measure seat height and table height, check that the armrests fit under the top and, last of all, fix the point above the middle where the lamp will hang.
How to do it with old pieces
An old table was made for life and already has a few lives behind it. Scratches, rings and a worn edge are proof that people have eaten at it, and they mean you need not be careful with it yourself. Do measure. Old tables often have a deep rail under the top and sometimes a stretcher between the legs. Sit at it with the chair you want to put with it.
Old chairs are sometimes a few centimetres lower than chairs of today. A thin cushion solves that. Chairs from the 1950s and 1960s, from Danish teak to plain beech, are light, slender and made to draw up to a table: exactly what Wegner and the Shakers teach you.
This evening, lay the table as if guests were coming, even if you are alone. Sit on each chair for a moment and look at what you see, where you bump into something and where the light falls. After that you will know exactly what has to change. If you are looking for the table the house will turn around, or for two more chairs, do come and look at De Huiszwaluw: there you will find tables, chairs, benches and lamps that already have a life behind them and have many more evenings in them. We ship worldwide.
Written by De Huiszwaluw