So cool! We had this machine for a while without knowing exactly
what it was; everyone was allowed to guess and the most delightful fantasies came along..
It is a machine that could easily pass for an art object and it looks
fantastic in a minimalist interior.
———————————————-
Meanwhile, an answer from an expert 🙂
Until the Second World War, ENOT sold many instruments as an importer / wholesaler.
Later they specialised mainly in grinding spectacle lenses.
The company still exists (Amsterdam Osdorp).
The soldering machine is still used, in more modern versions,
by opticians and jewellers.
If you want to solder, you can do so by putting current on the loose parts;
if the parts are of equal thickness and the break is clean, the metal becomes
hot at the point of the break and you can let silver flow between the
fracture surfaces, which completes the repair.
Where there is a difference in thickness between the 2 parts that have to be
soldered together, this is more difficult.
For example, the nose bridge of a pair of spectacles is 10 times as thick as the rim
in which the lens is mounted. In that case, soldering with a
carbon tip is easier.
One part of the frame is live and the other part of the
current is in the carbon tip. The frame always becomes hot where you
hold the carbon tip against it.
If you place the tip under the thin/thick joint, it becomes hot there
too and the silver can flow between the broken parts.
With thanks to: Nico Weiland 🙂
* SOLD *