Skip to content
De Huiszwaluw – vintage interiors
Collection NL

Caring for wood

From the library of

Wood is alive, even when it has been a cupboard for a hundred years. So an old piece of furniture asks for a calm spot, a soft cloth and now and then a little wax or oil. It helps to know what you have in front of you and where things often go wrong.

First this

This book is a help, not a guarantee. Every piece is different. Try every product and every method first on a small spot that does not show, and stop if anything changes. What you do is at your own risk: De Huiszwaluw cannot be held liable for damage. If a piece is valuable or very dear to you, ask a conservator first.

What you have in the house

For looking after a piece, the finish counts for more than the kind of wood. Wax gives a soft, silky sheen and feels almost like bare wood; you see it often on oak and walnut. Oil sits in the wood and forms no layer: the surface is matt and you can feel the grain. Much teak of the 1950s and 1960s is oiled. Shellac, also called French polish, is a thin, clear film with a deep, warm gloss, as on antique mahogany and walnut. Lacquer is a harder, closed film; much rosewood of the 1960s is lacquered. If you do not know, treat the piece as shellac. Shellac dissolves in alcohol and turns white from water and heat.

What ruins it

Dry air makes wood shrink, damp air makes it swell. It is above all the change that causes splits, gaps and lifting veneer. A stable relative humidity between 40 and 60 per cent is safe; above 70 per cent, mould and woodworm get their chance. So do not put a piece next to the stove or the radiator, or in an attic, a cellar or a shed. Keep it out of direct sun too. Light turns pale wood darker, bleaches dark wood and dulls a finish. That damage never goes away.

Dusting and cleaning

How museums do it. Dust comes off with a clean, soft, dry cotton cloth, and out of carving with a soft brush. Dirt they first try on a hidden spot with a cotton bud that is barely damp: if colour comes off or the spot turns white, they stop. Bare wood is never cleaned wet.

How it is often done too. Dealers wipe a lacquered or oiled piece with a well-wrung cloth and lukewarm water with a few drops of mild soap, along the grain, and dry it at once. Danish cabinetmakers recommend, for oiled wood, a solution of one teaspoon of white soap flakes to two litres of warm water, once or twice a year. On French polish and on wax, water leaves white marks; there you keep to the dry cloth.

Oil, wax and sheen

How museums do it. Wood does not need feeding: no oil and no wax stops it drying out, only the air in the room does that. A thin coat of hard, colourless wax polish does protect the finish and gives a quiet sheen. Museums apply it once a year at most, only on a sound finish. They do not use oil on a piece that was never oiled.

How it is often done too. Oiled teak that looks dry and greyish is touched up by dealers with teak oil or a thin furniture oil. The wood must be clean and dry. Apply the oil thinly with a lint-free cloth, along the grain, and let it soak in for fifteen to twenty minutes; check the tin for what the maker says. Then wipe off all the oil left on the surface with a clean cloth, until it stays clean. What is left lying turns sticky. Let the piece dry for a day before you put anything on it. Once or twice a year is enough. Oil makes the wood a little darker, and on lacquered wood it does not soak in. Leave used cloths spread out to dry outdoors: a wad soaked in oil can catch fire by itself.

An oak or walnut cupboard that has gone dull is waxed by cabinetmakers: a hard wax from a tin, based on beeswax, colourless or in the colour of the wood. Apply a thin coat with a soft cloth, let it dry for twenty to thirty minutes and buff it with a clean cotton cloth, along the grain. Once a year is more than enough; on a cupboard that is seldom touched a coat lasts for years. Too much wax turns sticky and holds dust. On French polish you take very little.

Scratches, bare spots and white rings

How museums do it. Light scratches in a wax layer often disappear when you buff the wax. Deeper scratches stay. For a white ring, caused by water or heat in the finish, museums use no home remedies; a conservator treats it.

How it is often done too. Dealers touch in a light scratch or a bare spot on an edge with a retouching pen or a wax stick in the colour of the wood. Choose the shade a little too light rather than too dark. On oiled teak a shallow scratch often disappears with the oiling alone. The risk is small, but a shade that is too dark will keep catching your eye.

With a white ring, tradespeople first wait a few days: a fresh ring sometimes fades by itself. After that they try a dab of petroleum jelly on the spot overnight; that often only half works. The next step is gentle warming with a hairdryer, never hotter than your hand can bear. This is where it goes wrong: too hot gives blisters, an iron scorches the film, an abrasive goes through the finish and alcohol dissolves French polish. On oiled teak you wash the ring away with light soapy water and then oil the top again. A black ring sits in the wood itself and does not come out at home.

Musty cupboards, sticking drawers and worm holes

How museums do it. A musty smell and a drawer that sticks point to damp; museums look for the answer in a drier, stable room. With small round holes they lay a sheet of white paper under the piece. If fresh, pale wood dust keeps falling on it, the woodworm is alive. The piece then goes into plastic, apart from other wood, and to a conservator.

How it is often done too. Dealers stand a musty cupboard open for a few weeks in a dry, airy room, with the drawers out, after vacuuming the inside with a soft brush. If the smell stays, a cabinetmaker seals the inside with a thin coat of shellac. A drawer that sticks runs again if you rub a candle or a block of paraffin wax over the runners and the underside of the drawer sides. Do not plane or sand: in winter the wood shrinks and then the drawer rattles. Old worm holes without wood dust do no harm. If they bother you, fill them with wax in the colour of the wood; a new hole then shows at once.

What you had better leave

Do not strip an old piece and do not sand it bare: an original finish does not come back. Do not use sprays or liquid polish with silicone; they leave a film that a tradesperson can hardly remove later. Do not take boiled linseed oil from the DIY shop, and do not rub oil onto French polish or onto wax. Do not glue loose veneer yourself and do not put sticky tape on it.

When to go to a conservator

Go to a conservator for lifting veneer or inlay, for live woodworm, for a finish that flakes or blooms white, for black rings, for loose joints and for splits in a top or panel.

Patina is not dirt

An armrest worn smooth by hands, a table top that is darker where the lamp always stood, a dent from a house move in 1920: that is not damage that has to go. It is the life of the piece, and it is exactly what new furniture lacks.

At De Huiszwaluw you will find furniture that already has a life behind it, and you are always welcome to ask us how best to care for a piece. We ship worldwide.

Written by De Huiszwaluw

← Back to the library See the salon wall →