Skip to content
De Huiszwaluw – vintage interiors
Collection NL

Caring for brass, copper, bronze and silver

From the library of

Metal looks indestructible, but what you see and love is a very thin layer: the skin of a brass lamp, the dark colour of a bronze figure, the silver on a plated dish. Every polish takes a little of it away. That is no reason never to polish. It is a reason to do it gently, and no more often than needed.

First this

This book is a help, not a guarantee. Every piece is different. Try every product and every method first on a small spot that does not show, and stop if anything changes. What you do is at your own risk: De Huiszwaluw cannot be held liable for damage. If a piece is valuable or very dear to you, ask a conservator first.

What you have at home

Copper is reddish. Brass is copper with zinc and is yellow. Bronze is copper with tin and nearly always has a dark layer that was put there on purpose or has grown over the years. None of the three is magnetic. If a magnet sticks to a ‘brass’ lamp, it is iron with a thin coat of brass. A great deal of brass was given a clear lacquer by its maker, and it belongs to the piece.

With silver, look at the marks. Sterling silver is 92.5 per cent silver, the rest is copper. If it says E.P.N.S. or E.P.B.M., the piece is silver plate: a thin layer of silver on another metal.

What damages it

Damp is the greatest enemy. At a relative humidity between 35 and 55 per cent nothing happens to most metals; above 65 per cent corrosion moves fast. The salt and grease of your hands bite into polished metal. Silver tarnishes because of sulphur in the air, and faster near wool, felt, rubber and newspaper. The dark tarnish on silver and the brown or black layer on copper, brass and bronze are stable and protect the metal. Pale green powder that comes loose is something else: it is called bronze disease, and it carries on as soon as the air is damper than about 55 per cent.

Polishing and using silver

How museums do it. A museum polishes as seldom as it can, because a little silver goes with the tarnish every time. If it is needed, it is done with the gentlest product there is: a paste of precipitated chalk and water. After that the silver is kept dry, in acid-free tissue or in a cloth that absorbs sulphur.

How it is often done too. At home and at the silversmith’s, silver is simply polished, with a gentle polish made specially for silver. Wash the piece first in lukewarm soapy water, so that no dust or grit is left on it. Apply a little polish with a damp sponge or a cotton pad and rub gently, in straight lines rather than in circles. Rinse with warm water and dry at once with a soft cotton cloth. Once a year is sufficient for most pieces. Silver plate is polished more lightly and more briefly, and where the yellow metal already shows through, you stop polishing.

How it is often done too. Silver cutlery stays at its best when you use it. If you wash it by hand in lukewarm soapy water after the meal and dry it at once, you hardly ever need to polish. The risk lies in the dishwasher. There silver turns dull and white, hollow handles can come loose, and silver that lies against stainless steel becomes pitted.

Brass and copper: bright or dark

How museums do it. Brass and copper are polished only if they have always been bright. Lacquered brass is not polished, because polish wears the lacquer away. Clean metal is given a thin coat of microcrystalline wax, not beeswax: that leaves a green, waxy deposit on copper and brass.

How it is often done too. If you like bright brass or copper, you may polish it; antique dealers do so too. Apply brass and copper polish with a cotton pad and buff with a soft, clean cloth. Ease the residue out of edges and seams with a wooden cocktail stick, because there it turns white or green. Bright metal tarnishes again of its own accord. You put that off with a very thin coat of microcrystalline wax, which you buff, and by wiping the piece with a dry cloth only from then on. The honest risk: every polish takes metal with it, and on gilded, silver-plated or brass-plated work you are soon through the layer.

How it is often done too. Brass that has turned dark and warm is exactly what many dealers and collectors leave alone. Then dusting and now and again a rub with a soft, dry cloth is enough.

Candle wax and bronze figures

How museums do it. Candle wax is not left in place, because it causes green spots on brass; it is lifted off with a wooden stick. The dark layer on a bronze figure is never polished: it is part of the work and it does not come back.

How it is often done too. On a candlestick without lacquer, silversmiths soften the candle wax with a hair dryer and wipe it away with kitchen paper. A lacquered candlestick goes in the freezer for an hour: the wax turns brittle and pops off under your fingernail. Pouring hot water over it works too, but many old candlesticks are hollow and filled, and water that runs inside will never come out again.

How it is often done too. A bronze figure that looks dull and dry is freshened up by galleries and auction houses with wax. With a soft brush or cloth, apply a very thin coat of clear wax without silicone, leave it for a few minutes and buff with a soft brush and then a cloth. Indoors that is needed once a year at most. Try it first on the underside: the solvent in wax can discolour some patinas, especially pale and coloured ones. Gilded or painted bronze should not be waxed.

The well-known home remedies

How museums do it. None of these remedies enters a museum. Acid and salt are exactly the substances that make copper, brass and bronze turn green, and a dip removes the tarnish too thoroughly, even from engraving where it belongs.

How it is often done too. Vinegar with salt and tomato ketchup are both an acid. They turn a solid copper pan or a brass tap bright in a quarter of an hour to an hour. The metal can get pink spots from them and tarnishes again quickly if you do not rinse and dry very thoroughly. On an old piece with colour, lacquer, soldered seams or gilding you do not do it. The bath with aluminium foil and soda and the dip take the tarnish off silver without rubbing. Silversmiths advise against them: the silver turns matt and whitish, the dark shading in engraving disappears, it tarnishes faster afterwards, and liquid that runs into a hollow handle stays there. People do it with single solid spoons and forks without decoration; that is where the damage is smallest.

What is better left alone

Do not use scouring powder, steel wool, a scouring pad or toothpaste, and do not use a general metal polish on silver: the particles are too hard. Do not polish lacquered brass, and never the dark layer on a bronze figure. Do not let water run into hollow handles, feet and filled candlesticks.

When to go to a conservator

Go to a metals conservator when pale green powder keeps coming back, when there are green crusts on silver, when a layer blisters or lifts, when there is a dent, a loose handle or a broken part. Removing or renewing old lacquer is specialist work too.

Patina is not dirt

The dark colour in the folds of a bronze figure, the soft grey in the engraving on a spoon, the warm tone of brass that has been touched for eighty years: that is not dirt. It is time made visible, and it makes the piece what it is. At De Huiszwaluw you will find pieces that already have a life behind them, and you are always welcome to ask us how best to care for yours. We ship worldwide.

Written by De Huiszwaluw

← Back to the library See the salon wall →